Axles & Clutch Units to suit various Trolleys
|
Highly skilled craftsmen using
top grade materials for the
manufacture of bespoke axles etc.
|
Axles for Bentley, Slazenger, HME 603, Energy, Trooper, Motorcaddy, 
Fraser, Europro, Ultra Soveriegn, Easycaddy, G-Tech. Any trolley from samples or drawings.
|
|
|
Bearing race.
Front Wheel
PK Freeway
Convex Profile.
Hub width 90mm.
shaft dia approx 13mm
Wheel dia 138mm.
|
Can use De-luxe axle below.
or
If you need the bolt and sleeve style buy G-TECH version below add bolt.
|
Bearing race.
FRONT WHEEL With sleeve
G-TECH, T 7/8, Hillman GT and Cruiser. Some Fraser & many others.
may need to add bolt
Hub width 90mm.
Sleeve dia approx 13mm x 9.5 mm int.
Wheel dia 138mm.
Steel Sleeve.
|
Front wheel, suits G-Tech, Trooper T7, Hillman GT & Cruiser, Europro, Easycaddy & many more.
|
Sleeve/bush for above wheels, wheel runs on sleeve. 
Inserts through wheel hub.
Locks into housing, wheel runs on sleeve/bush not bolt!
Sleeve dia approx 13mm x 9.5 mm internal.
90mm long
Check De-Luxe axle below.
|
|
Bolt kit 118mm long for above wheel.
can be cut down to suit shorter apps.
Dia 8mm.
|
Helps track adjusting to put washer between wheel
hub/bush and wheel housing on that side.
|
De-luxe axle kit Powakaddy Freeway, G-Tech, T-7, Cruiser etc.
Easier to adjust tracking, bolt does not spin inside bush or rust up.
Solid 13mm bar drilled 8 mm 88 mm long.
2 x 8mm set screws plain and spring washers.
|
|
Threaded spigot for wheel fixing.
Can use with bolts/set-screws.
or put together with stud.
8 mm thread, length 88 mm dia 13 mm.
|
SPIGOT ONLY
|
Axle studding 8mm thread.
19.5 mm long.
A few with dome nuts spacers and washers.
Protrolley PT2.
|
|
Front Wheel suits Greenhill, Caddimatic
and many older trolley types.
Hub width 109mm, tyre width 95mm
diameter 130mm, spindle 12mm
Can be used with 2 G-TECH spindle bushes cut to suit.
|
No longer available.
Consider G-Tech wheel and spacers.
|
Front Wheel suits Lynx TopCart, some Greenhill & Fraser, Prodrive,
and some imports & older trolley types.
Ultracaddy, Luxus.
Hub width 90mm, tyre width 84mm
diameter 120mm, spindle 7.8 mm
Running on bearing race.
|
NO LONGER AVAILABLE
CONSIDER G-TECH
ABOVE.
CHECK DIMENSIONS.
|
Front wheel Motocaddy, Power bug, Trooper T6.
|
 |
Front Wheel PT2
Dia 120mm Length 120mm Hub width 120mm
|
|
FLEXI FLITE QR
Rear wheels for Fraser, Greenhill, Electra Caddie and others.
Groove to pin 58.5mm- 61.5mm
In quick release form
Width 90mm, Diameter 258mm.
Internal clutch mechanism,
Will fit Precision, Bentley and some Hillman
with 485mm axle,
FOR 12mm AXLES.
For remote trolley use wheels two boxes down
or
we do a remote electronic conversion kit
to revert back to sensible.
|
CLICK LINK TO To Purchase
Also fits Slazenger,
E-Caddy,Masters & others.
Re-drill axle pin 60mm from groove.
Original = 50mm Pin to groove.
|
FLEXI FLITE R PIN
Rear wheels for TopCart and others.
Axle end to clip 72mm or less
Retained by "R" clip.
Width 90mm, Diameter 258mm.
Internal clutch mechanism,
Black or White.
FOR 12mm AXLES.
|
 Trooper Cadet,
need to file a tad off end of axle
and set stay backets in a mm.
Some trolleys may need to shorten axle a few mm.
Will NOT be quick release by lever any more.
But still removed fairly quickly!
|
|
AS ABOVE BUT WHITE
|
Remote Trolleys solid drive, no clutches suits
remotes only.
Solid drive wheels for remote control trolleys.
Quick release groove to pin 58.5mm to 62mm.
Can be modified to 55mm!
CONTACT US
Can redrill or make axle to suit your trolley.
Uses Flexi Flite replacement tyres.
Caddiemaster 400R with modifications.
|
Sold in pairs.
 Caddiemaster needs mod.
Replaces Caddiemaster and other styles 12mm axle
BUT you will need to drill 4mm hole in axle 58mm in from
groove used for release mechanism and fit 4mm rolled pin.
|
SKYLINE 12mm shaft Quick release wheels.
Use on Fraser and other trolleys.
Groove to pin 57mm- 61.5mm
In quick release form
Width 90mm, Diameter 258mm.
Internal clutch mechanism,
Will fit & improve Slazenger 2 groove axle.
Will fit Precision, Bentley and some Hillman
with 485mm axle,
Can do special 55mm-62mm Terrain etc.
email in.
or use Flexi Flite above.
FOR 12mm AXLES.
Use Flexi Flite replacement tyres.
|
|
GT Wheels,
Rear wheels, Hillman GT, Hillman Cruiser 330 axle, Hillman Ultralite, Europro, Trooper T7/8
Caddyak early, G-Tech, Easycaddy,
|
Some cruisers now fitted with 500mm axle.
CHECK PDF below on axles BEFORE PURCHASE MAY NEED 530mm AXLE ALSO
We can take your 510mm axle against new 530mm
as will be required to fit these wheels,
very small percentage of Cruiser have this axle
it appears.
Need axle sent here first.
|
|
 |
Wheels with inbuilt clutches will need maintenance
as with all mechanical device (cycle wheels etc)
Keep clean free of grit and lightly oiled.
DO NOT CLEAN CLUTCH AREA WITH JET WASH
THIS CAN BREAK SEALS.
or subjest to dragging through salt water sand etc without cleaning and oiling straight away.
|
|
Flexi Flite Tyre 
Tyres for spoke wheels.
Diameter 255mm, width 89mm,
inside dia 185mm & 195mm (tapered)
inside rim 54mm.
Comes with fitting instructions.
|
Price for 1 tyre
|
FLEXI 17 TYRE
REPLACEMENT TYRE FOR HORIZON WHEELS
Powakaddy, Topcart, Fraser
Older style solid hub wheels
Not as easy to fit as FLEXI FLITE style.
Old tyres need cutting off, new ones heated in very hot water pushed on hub with glue.
|
Price for 1 tyre.
|
POWAKADDY FREEWAY WHEELS
HORIZON 17 PIN
|
HORIZON 17 QR
|
HORIZON 17 PIN
|
FLEXI SKYLINE
|
|
|
|
|
|
Clutch driven wheel.
|
|
|
FLEXI 17 TYRE
|
FLEXI 17 TYRE
|
FLEXI 17 TYRE
|
FLEXI FLITE TYRE
|
 |
Wheels with inbuilt clutches.
Keep clean and lightly oiled.
DO NOT CLEAN CLUTCH AREA WITH JET WASH.
|
 |
|
FLEXI 24
IN BLACK ONLY!
CADDIMATIC, BABY RHINO AND OTHERS
Longer clutch inner race.
Spigot recessed 7mm from tyre profile.
Retained by "R" clip.
12mm axle.
Removable outer (late) cover.
 Older style cover not available.
IN BLACK ONLY!
|
FLEXI 24 TYRE
Tyres for above wheels.
Classic, Caddimatic etc,
|
|
REAR WHEEL REPLACEMENT
Motocaddy 2016, Trooper T6, Pulsar, Walimex, Powerbug,
updated 2019
RH only
|
 |
AXLES TO YOUR SPEC,
Download or email us measurements,
will see if we can help.
|
From approx £36.00 inc ship & VAT.
|
|
|
 |
 |
Axles with 6mm drive holes will have no warranty
AS THIS IS A DESIGN FAULT
By Chinese manufacturer.
|
 |
Original Chinese made
AXLE REPLACEMENT WITH
CROWN GEAR FITTED.
Trooper T6, Motocaddy S1, 06 Explorer, Pulsar, Walimex, Power-Bug etc.
Later type with shallower grooves
for the circlips.
LTD WARRANTY
|
Main gearbox drive gear only S1,T6, Bug.
28mm Centres. Salvage parts.
Not with speedo.
We may have some salvage gears 28mm and 31mm
|
Original Chinese made
 AXLE REPLACEMENT
Trooper T6, Motocaddy S1, 06 Explorer, Pulsar, Walimex, Power-Bug etc.
Later type with shallower grooves
for the circlips.
Crown wheel pins approx 28 mm centre.
Some new some salvage.
Ltd WARRANTY
|
NO STOCK
The installation is quite complex on this trolley, if you are not sure of your ability, consider a trolley repair specialist. Or we can collect.
|
Original Chinese made
Later two groove axle.
Motocaddy S1/3, 2010 2 groove Bug etc.
Crown wheel pins approx 28mm centre.
Mainly salvage parts.
Ltd WARRANTY
|
NO STOCK
|
|
Pictures from Ripu Easycaddy, useing existing axle, modified by adding groove for new wheels to lock onto and trimming off original groove etc, do not move clutch out by drilling axle for new pin this will weaken the axle.
Cost approx £56.00 plus VAT and shipping if required.
ABOVE LINK £49.99!
Trolley collecting and redeliver UK main £28.00
plus repair costs & VAT.
|
4mm Rolled Pin Punch
T4G4mP
Remove clutch and axle pins easily.
longer than in image.
|
Now available
Designed to hug T7 & 12mm clutch etc,
makes removing those pins simple.
|
 |
|
AXLE REPLACEMENT TrooperT7/T8
High spec stainless.
|
|
Slazenger, Masters MT-250,
S 520, Powerpro Freedom, plus!
________________
EUROPRO, Kane, Ultra Soveriegn & others.
FRASER FOLDAWAY
Wide wheel base from stock.
|
Kane Golf
Europro
G-Tech, Easycaddy, Kaddyak.
|
AXLE HME 603
Jinhau Honest Mech Man co ltd.
|
New stainless axle.
|
Fits Hillman, Bentley and Precision golf trolley.
Axle 485 x 12 mm single groove
with circlip. 
Axles with 5/6mm drive holes will have no warranty
AS THIS IS A DESIGN FAULT
By Chinese manufacturer.
|
New stainless axle for Bentley trolley.
|
|
|
Axle 535 mm Caddiemaster, Power Pro.
Suits wheel and clutch upgrades.
|
|
|
 |
Clutch for Trooper T7/T8, Ultracaddy SOVERIEGN, Easycaddy SNOWDON, Europro,
These are 12.4mm clear.
Use on G-TECH, Kaddiyak, Hillman etc
wrap masking tape on axle.
Fits some Europro trolleys.
|
|
|
 |
T4G Clutch as above
High quality UK built parts.
Suits Powakaddy Freeway etc,
|
|
High quality clutch replacement.
Hillbilly Golf Trolleys.
SET LH & RH CLUTCHES
Stronger silent operation.
|
|
Dummy Clutch Freeway brake remotes
|
|
Clutch inserts Hillbilly TERRAIN.
Energy, Mocad.
|
MOCAD CLUTCHES
|
Clutch repair ENERGY. HILLBILLY TERRAIN (NEW) type.
Needle roller clutch inserts.
Repair parts.
|
|
|
2 x R Clips for axle drive or wheel retention.
|
Steel Roll Pins 4mm x 16 mm
|
Packet 6 16mm spring pins Ship UK first £6.99
Used on manyt trolleys for Gearbox to axle drive also wheel clutches etc.
|
Steel Roll Pins 4mm x 20mm
Mass produced item 19mm to 22mm
easily filed or cut to shorter lengths.
|
Packet 6 20mm rolled pins
Used on manyt trolleys for Gearbox to axle drive also wheel clutches.
|
Solid splined Steel Pins,
Drive gear fitting, 4mm x 16.2 mm
Used on Walimex & Pulsar.T6, Bug, Motocaddy
Solid splined steel pins,
Wheel locating 4mm x 20 mm
T6, Bug, Motocaddy Walimex & Pulsar.
|
Packet 6 pins, T6 20mm Wheel Pins Ship UK first £6.99
TRADE PRICES AVAILABLE.
|
|
TRADE PRICES AVAILABLE FOR VOLUME PURCHASES.
|
Powakaddy gearbox.
|
Purchase Powakaddy Freeway gearbox, etc.
PK Freeway LSD INVOLVED
|
|
|