ProTrolley Parts
Ainsliegolf is currently working with the ProTrolley team and we now have a selection of parts to be sorted and catalogued
available very soon.
ProTrolley Electric golf trolleys, parts and spares.
EMAIL YOUR REQUIREMENTS PLEASE
|
GT 300
|
GT 300 R
|
PT 1
|
Lite
|
PT 2
|
ULTRA
|
We have now had a shipment of various parts to fit ProTrolley versions.
We are on a learning curve here and will add parts to website with we hope accurate information!
The parts are from Protrolley and we find are not new in many cases, we have control modules marked up as tested and in good order, and for some we have test rigs now so we can check for our selves.
The warranty on the parts will be limited.
Unless stated New Parts they maybe salvage items.
|
Handle mouldings
No stock
|
Handle mouldings
No stock
|
Handle mouldings PT1
NO STOCK
Sorry.
|
Self adhesive screen with removable protective layer.
|
Handle Mouldings
|
Handle Mouldings ll
Similar to PT2 but has hole for LED.
|
Sold out.
PT3 HAN: Handle Protrolley PT3
Have top sections only, somtimes with
facia.
Facia above handle GT300
|
Top mouldings.
PT3 HAN: Handle Protrolley PT4
Handle mouldings
|
No stock.
Consider using GT 110 handle.
will need to fit your potentiometer into G-Tech handle and use suitable knob.
|
|
Spare boards A
|
Spare boards B
|
GT 300D
Digital Sensor Connector.
|
Digi encoder later GT 300
|
300R 2008 5 wire 10k Pot
with LED
|
Plastic micro switch covers x 10
New parts.
|
GT 300R 2008 10k switched potentiometer with LED
Original Chinese switch.
UK made replacement.
New parts.
|
Facia board cover.
New parts.
|
10k Potentiometer
5 pin plug uses 4 wires
sw and pot connectors fused.
|
GT 300 2008 10k pot.
Fits Vivo, Stowamatic and others.
|
Digital display handle board.
Ultra/Ultra remote.
Sold out.
|
Digi board GT 300 2008
New parts
|
Handle board GT300 09
|
10K potentiometer GT300 09
Original pictured below
Goes with board to left.
|
Replacement potentiometer UK built
5 pin pots.
Replacement 5 wire 10k Potentiometer
GT300R to right includes knob.
New parts
|
Original 10k switched potentiometer 5 pin plugs suits board below.
SOLD OUT
USE UK VERSION LEFT
|
Splined potentiometer/encoder knob.
Used on many Protrolleys, Caddiemaster, Ultracaddy.
|
Handle board 5 wire switched pot above.
New parts.
MICRO SWITCH
Have sold out of these.
Can fit new switch if you send part in.
|
Module Torberry
|
Module 3 PIN KETTLE
Same as module to left but 3 pin kettle plug not Torberry
|
Module Ultra 5 Speed
Ver 1.1
There are several versions of this,
more to follow we hope!
No stock left. check below.
|
Ultra Remote Controller.
NO STOCK LEFT
NOT REMOTE!
|
Modified to T4G module and potentiometer use.
Hillman/Stowamatic/Protrolley.
Chinese electronics removed, T4G
replacement kit installed.
Reliable trolley.
|
|
Module GT 300R Remote 3 pin plug.
|
Module GT 300/255R Remote Torberry connection.
Not available, use 3 pin plug version.
|
Module GT 250R Remote 3 pin plug.
6 pin loom connector
As above only red/black torberry motor leads.
|
Kettle plug can be removed to fit alternative connectors.
|
2008 ULTRA!
Torberrys with 6 pin loom,
control module.
|
GT 300 XL 250. 2008 5 pin.
3 pin kettle socket.
|
6 pin module.
Stowamatic, others.
|
|
Six wire harness/loom.
Ultra. 1500 mm long approx.
Code
Tested salvage parts.
|
Trojan 350 Remote harness.
6 pin male at module 5 Pin female at handle.
New UK parts.
|
Remote handset. No battery.
New parts.
|
Remote handset. No battery.
New parts.
|
Wheels, clutch, axles
|
Replacement wheels and axles GT 300R
If you have three spoke wheels will maybe need full kit! Measure inner groove to face of 3 tooth dog.
50mm required minimum.
Read lower down.
THESE ARE NOW SOLD OUT.
VARIOUS AXLES AVAILABLE.
Flange face to inner groove 50.5 mm
New axles are 196mm long.
Old 3 spoke one 184mm Long
Face to groove approx 43mm
Salvage parts.
|
Pneumatic replacement wheels and axles GT 300R
As left but air tyre wheels.
THESE WHEELS and KITS NOW SOLD OUT
Will be doing kit with Ultra Wheels shortly.
Can do tyres and tubes
Tyres and tubes as above wheels
4.10/3.5-4 4Ply
New parts.
Flange face to inner groove 50.5 mm
New axles are 196mm long.
Old 3 spoke one 184mm Long
Face to groove approx 43mm
May fit old axles in outer groove but no
Breakdown groove!
|
Axle Carrier 12mm bushed
New parts.
|
Axle drive dogs x 2
Maybe salvage parts.
Check length.
|
GT 300R Drive plate.
Sold in pairs.
|
|
GT 300 Clutches.
Pair of clutches, right and left.
|
Sorry no stock.
|
Wheel
|
Rear wheels GT 250R Remote
New parts.
|
Modified wheel kits GT300/250
Quick release Skyline wheels.#Higher quality, replacable tyres.
Will need to drill axle to suit wheels 4mm pin.
REPLACING 3 SPOKE & 5 SPOKE WHEELS.
|
Axles require modifying.
4mm pin hole 59mm from groove.
300GT Kit
300 push centre GT Kit
CHECK AXLES HERE
|
GT 300 Push centre wheels 535 axle. PDF above, purchase below.
|
AXLES GT 300
AXLES GT 300 push centre wheel.
Axle Ultra UK Stainless.
Axles with 5/6mm drive holes will have no warranty
AS THIS IS A DESIGN FAULT
By Chinese manufacturer.
|
Not available.
|
Remote axles
Later axles are 196mm long 50mm to face.
Use with short drive dogs.
Early axles 184mm long 43mm to face
And we have one 214mm long 50mm to face.?
|
|
Replacement inserts for Ultra clutches.
OK if inner spigot not worn.
We can fit bearings for you, send clutches in.
|
|
Stabiliser
GT300/255 R
NO STOCK
|
Stabiliser PT2
NO STOCK
|
Stabilser
|
Front Wheel PT2
New parts.
Dia 120mm Length 120mm Hub width 120mm
|
|
Front Wheel GT300/250
No Stock use wheel to left.
Can use differant axles.
|
Front Wheel GT 300
Dia 135 mm. Tyre width 80mm.
Hub with 80mm/ 94mm inc bushes.
Bearing inside 11.8 mm
NO STOCK.
|
|
Remote wheels Ultra.
Single pin drive.
67mm pin to inner groove.
|
Sold OUT
|
Service spares and parts for Protrolley Electric Golf Trolleys
|
Chassis
|
Battery tray, stabilizer post and
other chassis parts,
GT 300/255 and R
|
Wishbone/A frame.
Lite.
|
Battery tray and chassis section.
Lite!
|
|
Centre hinge assy.
New parts.
|
Chassis block.
|
|
GT300
Lower bag holder/housing.
|
Lower Bag Support
|
GT300 Housing complete with wheel.
Salvage items no stock left.
Use above housing and a front wheel.
|
Upper bag support.
|
Chassis long tubes.
300 300R
New parts.
|
|
New parts.
|
Maybe salvaged parts.
|
200mm to bend then 100mm
start of slot 91mm
|
|
With hinge and latch
may be salvage parts.
|
|
Slide latch
|
|
Fixed latch
|
|
|
Scorecard holder all 22 mm
chassis trolleys.
Simple push onto top handle tube
leaves handle bolts free for brolly holder.
|
Front axle kit.
|
SALVAGED RECLAIMED MOTORS AND GEARBOXES
|
|
|
|
|
Ultra MOTOR/TRANS
UltraR Left
Left hand motor/gearbox type 2.
|
Ultra R MOTOR/TRANS RIGHT.
Right hand motor/gearbox type 2.
|
Ultra Gearbox
Ultra and Remote Left
|
Ultra Remote Gearbox
Right hand side.
|
12.3 axle, motor and gearbox
|
GT300-GT300R Motor and Trans
12 mm, axle Motor and Gearbox
Getting low on these, can use ultra motor trans!
|
Motor for above GT300
|
|
GT 300R RIGHT side.
Gearbox GT300 Remote R/H 12mm
|
GT 300 &300 R LEFT side.
Gearbox for Gt300 plus.
Also L/H 300R 12mm
|
|
Earlier Gearbox.
|
|
Can use on Caddiemaster,
Promaster etc with new
ELECTRICS from us.
|
|
|
Pay via Credit/Debit card or Paypal, on secure terminal.
|
|
|
|
|